Accessories & Equipment
Uro-Camper is passionate about travel and adventure. We constantly innovate, develop, and manufacture diverse, lightweight yet resistant, high-quality equipment and products for our clients to travel the world freely.
Heater-Box Stainless
If you are quite the adventurer this self-contained portable air heater is for you.
Light and easy to transport, makes it is ideal for all kinds of outdoor activities to use on anything from a rooftop tent, trailer, boat, or even a traditional ground tent.
It comes with a powerful remote that allows you to turn the heating on or off from a distance.
The 2D portable has a fuel consumption of only 0.10-0.24 liters of diesel per hour and a low power draw of 1.5 amps to 15 amps while starting.
Simply hook it to a 12-volt supply, turn it on and it’ll be ready to keep you warm.
Mercedes Sprinter Equipment and Accesories
Stainless Steel Underbody Potable-Water Tank · Spare wheel Area · 130L · Valid for 906W & 907W · Mounting brackets included
Extremely durable, made with 1.5mm thick AISI 316 stainless steel. Easy installation on the chassis using included rivet nuts and screws.
polyurethane putty and stainless-steel screws are supplied to install the included inspection cover. The tank has multiple connections for water filling, emptying, aerators, and an integrated suction tube.
It does not come with an opening for a level sensor as there is a wide variety of sensors on the market with different diameters. The installer must make the opening for the sensor to be installed. Supplied with 1″ drain tap.
An optional aluminum protective shield is recommended to prevent any damage to the tank and insulation.
Underbody Aluminum Water Tank · Driver-Side 80l · Passenger-Side 69l · Valid for 906W & 907W 4×4 & 4×2 · Mounting brackets included
Water tank ideal for non-potable water made with 3mm thick laser cut and TIG welded aluminum.
Includes welded mounting brackets to ensure correct fitting with no protruding parts that can hit the ground, avoiding movement due to shocks or vibration.
Supplied with screws and rivet nuts.
The tank includes:
- The passenger side tank includes a baffle plate fixed to the chassis to divert the flow of hot gases and thus avoid burning the insulation.
- A hermetic inspection cover for inspection, cleaning, or facilitating the assembly of the fittings.
- A ¼ female connection to connect an aeration tube.
- 3 ¾ female connection for the liquid inlet- Connection fittings are not included, they must be ¾ male threaded and can be purchased for different hose diameters (16mm, 19mm, 25mm) or a ¾ plug.
- A 1″ male connection for the drain valve with a butterfly wrench.
- Not compatible with a sliding door on the driver side.
Optionally we can supply aluminum protection plates, highly recommended to protect the thermal insulation.
Overhead Storage Compartment Mercedes W907
Practical storage made of 16mm thick bamboo designed to be installed under the high-roof cabin of the Mercedes Sprinter 907.
The storage adds a touch of elegance to the space avoiding any visual contamination. Ideal for storing window insulation, clothing, or any other light objects.
Includes easy-to-install metal anchors and a Spanish manual.
Anchor Plate Kit with Shackles
Anchor plate with shackle for Mercedes Sprinter or Man TGE/VW Crafter.
It is necessary to indicate the vehicle model for manufacturing.
Made of 15 mm thick steel. Includes screws and shackles.
Ideal for rescuing or being rescued from the back of the vehicle.
Winch Support Mercedes Sprinter 4×4 907
Valid for the new 4 cylinders version
Winch support designed and manufactured by Uro-Camper´s team. The need to develop and manufacture our own winch support came from the many hours we had to spend adapting all the different parts from different manufacturers to be compatible with eachother.
Uro-Camper decided to come up with out kit that includes the winch support with folding license plate holder, the front protection plate of the carter, the defense and the shackles, all compatible with eachother.
Kit Product Description – May be sold separately
Winch support: Manufactured with a 6mm thick laser-cut steel and finished with electrostatic textured black paint. Our winch protects the lower body of the radiator by means of an integrated double folding and some perforations used to fix the aluminum front protection of the engine casing. It integrates welded anchor points for shackles which are useful for installing a return pulley or rescue sling. Moreover, it includes a folding license plate holder that will hide the winch rope guide and support long-range headlights.
Under base protection: Made of 8 mm thick aluminum. To be fixed by means of screws to the vehicle chassis and to the winch support. On its front part, it has a milled recess to fix the lower edge of the bumper, making it fully flush mounted and integrated without the edge of the plastic bumper forming a step that can get caught when reversing on tracks or uneven terrain.
Warn Evo 12S Winch: Our winch brackets have been designed to install the Warn VR 12S winch. It is without a doubt an excellent high-quality winch with enough force to get the Sprinter 4×4 out of almost any circumstance where it is required. Traction capacity of 5,443 kg. 12v. 9.5mm x 27.4-meter synthetic cable. 2-in-1 remote control, wired and wireless. We supply it with a piece to fix the relay box to the chassis of the Sprinter and a plug for the connection of the cable control. For more information about this winch, you can access the product Warn page https://international.warn. com/vr-evo-12-103254
Front engine protection: Manufactured with 700Ømm Black Steel
Black Shackles: They are necessary to securely anchor a return pulley and thus double the traction force of the winch. They can also be used to fix rescue slings. These shackles are compatible with our Mercedes Sprinter rear shackle anchor plates.
Volkswagen & Man Underbody Water Tanks
VWT5/T6 2003 Onwards · Stainless Steel Potable-Water Tanks · Spare Wheel Area · 98L
Extremely durable, made of 1.5mm thick Aisi 316 stainless steel. Designed to be installed in the spare wheel area of the Volkswagen.
Transporter range, from VW T5 to the current T6.1 (models from 2003 to the present). Ideal for 4Motion models.
Easy installation, and great resistance to impacts.
It includes:
- Screws and threaded rivets to fix the tank to the chassis.
- Integrated suction tube to connect to a pump.
- A 38 mm inlet connection to connect to the filler neck.
- A 10mm aerator and a drain plug.
Man TGE & Volkswagen Crafter 4X4 and 4X2 · From 2017 Onwards · Aluminum Water Tanks
Spare wheel area 80L
Driver-Side area 70L
Water tank ideal for non-potable water made with 3mm thick laser cut and TIG welded aluminum.
Includes welded mounting brackets to ensure correct fitting with no protruding parts that can hit the ground, avoiding movement due to shocks or vibration.
The tank includes:
- A hermetic inspection cover for inspection, cleaning, or facilitating the assembly of the fittings.
- A 10mm Ø aerator.
- A 1″ male connection for the drain valve with a butterfly wrench
Connection fittings are not included, they must be ¾ male threaded and can be purchased for different hose diameters (16mm, 19mm, 25mm) or a ¾ plug.
130L STAINLESS STEEL WATER TANK
SPARE WHEEL AREA CRAFTER & MAN TGE 2017 Onwards
Enhance water storage in your Volkswagen Crafter (4×4, 4×2) and MAN TGE (since 2017, L2 version) using this 140-liter tank. Crafted from 1.5 mm thick AISI 316 stainless steel, it is designed to fit in the spare wheel well. Installation is simple and secure, offering a durable and effective solution to boost your vehicle’s water capacity.
Material: AISI 316 Stainless Steel
Capacity: 140 Liters
Secure Fixing: Includes screws and threaded rivets
Functional Connections: For filling, emptying, aerating, and accessing
Optional Addition: Aluminum Protective Plate
Weight: Approximately 30 Kg.
Anchor Plate Kit with Shackles
Anchor plate with shackle for Mercedes Sprinter or Man TGE/VW Crafter.
It is necessary to indicate the vehicle model for manufacturing.
Made of 15 mm thick steel. Includes screws and shackles.
Ideal for rescuing or being rescued from the back of the vehicle.
General Accesories
Uro-Camper Shower Tray
Extremely durable, made of 1 mm thick marine quality stainless steel with integrated 8 mm thick Formica Compact flooring or treated bamboo.
Two drain holes to ensure proper drainage despite the slope.
We can adapt to any size requested. By default, our shower tray is 50mm tall and has a perimeter frame of 20mm
Standard Measurements
- 60 cm x 60 cm 60 cm x 70 cm
- 60 cm x 80 cm 60 cm x 90 cm
- 70 cm x 70 cm 70 cm x 80 cm
- 70 cm x 90 cm 70 cm x 100 cm
- 80 cm x 80 cm 80cm x 90 cm
- 80 cm x 100 cm 80cm x 110 cm
Wall Mounted Camper Storage Organizer
3 mm thick laser-cut aluminum body.
Surface treated with textured electrostatic paint which makes them resistant to humidity and saline environment.
Elastic cords are laid horizontally to retain objects and at the same time allow the user to remove items from the top or through the elastics.
Would you like a personalized quote with shipping costs?
At Uro-Camper we are as passionate about adventure as you are. For this reason we transfer our passion to the manufacture and customization of camper habitable cells and off-road vehicles.
We are a 100% Spanish company with its facilities in Seville.